Friday, 10 June 2011
finished!!!!!!!!!! just needs the paint touching up
At last its completed! radiator up stands fitted to clear the waste pipe. Hot water pressure restored due to the existing system running on 15mm instead of 22mm so when the 10mm mono block tap was fitted the flow came to a trickle. So we connected too the 22mm pumped hot system that we fitted a few years ago and hey presto! Its alive! We did install a pressure regulator as there is no way we can guarantee the old pipework to run under too much pressure. Sprinkling of caulking and its handed over to be finished ready for touching up.
at 8:41:00 pm